AI Propane Adaptor Kit: FAQ
Table of Contents
- What GBBs is the Propane Adaptor designed to fill?
- How many times can I use it?
- Is it difficult to install?
- How do I lubricate the propane I load into my GBB mags?
1. What GBBs is the propane adaptor (PA) designed to fill?
The AI PA is compatible with most GBB magazines. Users have reported some difficulty filling KSC M11, WA Wilson Combat magazines. Users of these magazines have found that the AI PA can be used to fill these magazines with careful alignment of probe tip and fill valve.
Disclaimer: Although many magazine types are compatible with the AI PA, not all GBBs are designed to be propelled by propane. Some GBBs are designed for HFC134a which exerts less pressure than propane. It is your responsibility to assess your GBBs ability to handle propane pressure. If you are comfortable using green gas, youíve already accepted the use of propane.
2. How many times can I use it?
The AI PA is durably constructed from nickel plated CNC machined brass parts. There have been no reports of adaptors wearing out or breaking under normal use. Some users have broken probe tips when they dropped a tank of propane with an installed PA. Barring probe breakage (donít drop your tank) or loss of parts, an AI PA should not wear noticeably.
3. Is it difficult to install?
Piece of cake. Installation an AI PA is quick owing to itís two part design. Bottle fitting and probe can be installed in seconds. This is covered in the installation video below, in reduced quality for easy download.
4. How do I lubricate the propane I load into my GBB mags?
Silicone oil can be dropped into the valve opening on a propane tank prior to insertion of the fill probe. Two drops every 8 magazine fills is sufficient for GBB lubrication. This is covered at the end of the video.
Have a question that isn't answered here? Email me!
-Carlton Chong